Specification and size of aluminium alloy tube

What are the common specifications and sizes of Aluminum Pneumatic Cylinder Tube?

Aluminum Alloy Pneumatic Cylinder Tube has a variety of common specifications and sizes. Chenna Machinery lists some common ones for you:
Diameter: Common Pneumatic cylinder aluminum tube diameters include 20mm, 25mm, 32mm, 40mm, 50mm, 63mm, etc.
For example, in some small automation equipment, cylinder tubes with a diameter of 20mm or 25mm may be used.
Wall thickness: Usually between 1mm and 5mm, depending on the pressure and application scenario. For example, for general pressure requirements, a wall thickness of about 2mm may be sufficient; while in high-pressure environments, a wall thickness of 4mm or 5mm may be required.
Stroke length: ranging from tens of millimeters to several meters, such as 50mm, 100mm, 200mm, 500mm or even longer. In some precision equipment with short strokes, only about 50mm of stroke may be required; in large machinery, several meters of stroke may be required.
Inner diameter accuracy: Generally, higher requirements are required, and common accuracy levels are H7, H8, etc.
It should be noted that the specific specifications and sizes will vary according to different manufacturers and application requirements. When making actual choices, factors such as working pressure, load, speed requirements and installation space need to be considered comprehensively.www.chennamachinery.com